Evaluate Optimal Device Ink Limits

From ColorWiki

Revision as of 21:56, 13 March 2009 by Patrick (Talk | contribs)
Jump to: navigation, search
Uses "channel constraints" to simulate limit inking of CMYK profile.
Compare the gamut of a proofing system to a simulation profile to determine the best ink limits for the proofer.

Good for setting inkjet channel limits prior to profile generation.

Limiting inking levels improves profile accuracy. This test ensures that you don't limit too much - for example, shrinking the gamut so it cannot contain the simulation profile.

This test opens the two profiles into the grapher and activates the Channel Constraints feature. The user then uses the Channel Constraints sliders to reduce the ink used in the proofing profile. When the gamut of the proofing profile is reduce until it just contains the simulation profile, make a note of the channel constraints numbers and apply those to the RIP. See the ColorSmarts Guide Summary window (which shows up at the end of the test) for further instructions.

Also see the Constrain Channels feature of the manual for more information.

While this is primarily intended for CMYK profiles, the constrain channels feature is also available for RGB profiles, to help learn or demonstrate how red, green and blue make up the profile.



Back to the ColorSmarts Guide page

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox