From ColorWiki

The Maxwell Client can be locked in the Admin mode or the Operator mode.

Admin

Admin mode is intended for account administrators or single-operator uses.

Operator

Operator mode is intended for uses where a large number of targets need to be measured regularly, such as every day. A typical user might be a press operator who needs to upload a proofing target every day in order to verify that proofs are in compliance. In this scenareo, the operator does need or want access to the configuration screens in the Maxwell Client, but would benefit from a quick interface that allows him to identify himself, the job number and the time the measurement was made.

To Lock

To lock the user interface on either Admin or Operator:

• Click the lock icon on the bottom left corner of the window,
• Enter a password to be used in the future to unlock this function
• Click the "Lock" button
• Enter the password again to confirm
• Click the "Lock" button

This pane will now be locked in this configuration until the user clicks the lock icon and enters the password.

HELPFUL HINT:

Right-click on the OPEN lock icon will allow the user to reset the password. Note that the lock needs to be opened first in order for the password to be reset.